Fire Riser Room Sign Height Requirement

The fire sprinkler riser assembly the fire alarm control panel fire alarm manual pull station spare sprinkler heads storage box and the document box for as built drawings shall be located within the room.

Fire riser room sign height requirement.

Stairway identification signs shall comply with all of the following requirements. The national fire protection association nfpa 13 standard for the installation of sprinkler systems specifies many different requirements for the types of signage that sprinkler systems must include. The requirements in the code vary from sign to sign and their purpose isn t always immediately clear. In some instances the system s fire pump and fire alarm control panel are also located in the sprinkler riser room and additional signage is required if they are.

The letters designating the identification of the interior exit stairway and ramp shall be not less than 1 1 2 inches 38 mm in height. 6 6 4 identification of valves. Signage is required on the access doors to fire pump and riser rooms and shall consist of letters at least two inches in height. And some local codes require riser rooms to house remote unit fire alarm panels connected to the master fire alarm panel in multi family residential occupancies.

Fire pump and riser rooms shall be maintained to be no lower than 40. The signs shall be a minimum size of 18 inches 457 mm by 12 inches 305 mm. Most fire sprinkler system valves must be identified with metal or rigid plastic signs. Ifc section 1023 9 1 signage requirements.

Section 6 6 4 of nfpa 13 stipulates sign requirements for all control drain venting and test connection valves while section 8 16 1 1 expands on the guidance for control valves. Fire equipment room minimum requirements fire riser room the fire equipment room shall be located within the building footprint.